loading

Global Leading Diamond Tool Manufacturer.

How Oscillating Saw Blades Are Made: From Stamping to Packaging

How does a flat piece of steel become an oscillating saw blade? At our Johnson Tools factory, we stamp the blade components, machine the teeth, and prepare the blade for final assembly and finishing. The exact process varies by model. For example, the two-piece blade shown in this guide has seven weld points, while the surface finish is selected according to the blade design.

The factory photos below show eight stages of production, from raw material preparation to packaging.

1. Material Preparation and Stamping

Production starts with preparing the steel and stamping it into blanks. The stamping die gives each blank its basic shape before later operations refine the cutting edge. For a two-piece blade design, the mounting plate and the toothed blade body are separate components that are joined later.

2. Tooth Grinding and Polishing

Grinding shapes the cutting edges of the teeth. Polishing smooths the surfaces specified for the blade design. These operations do different jobs: grinding establishes the shape of the cutting edge, while polishing addresses the surface finish.

3. Tooth Setting

Grinding gives each tooth its cutting shape; tooth setting changes its position. On blade designs that use set teeth, selected teeth are offset sideways so the cut is wider than the blade body. That extra clearance gives the body room to move through the cut. The tooth pattern depends on the blade design and its intended use.

4. Heat Treatment

Heat treatment helps achieve the hardness needed for the blade’s application. The goal is not simply to make the steel as hard as possible: the blade also needs enough toughness for its intended use. The treatment depends on the steel and the blade design.

5. Welding the Mounting Plate to the Blade Body

On the two-piece oscillating multi-tool blade shown in the close-up below, weld points join the mounting plate to the toothed blade body. The mounting plate is the part that attaches to the tool; the blade body carries the cutting teeth.

The seven circular marks are visible where the two components overlap. The welds are designed to keep the components securely joined during normal use. The seven-point layout shown here is specific to this blade and is not a specification for every model.

Photo caption: Weld points are visible where the mounting plate overlaps the toothed blade body.

6. Surface Finishing Options

We use electrophoretic coating, titanium plating, or spray painting, depending on the blade design. These are alternative finishes, not three treatments applied in sequence to the same blade.

If you’re sourcing several blade styles, confirm the finish for each model when reviewing samples or preparing a bulk order.

7. Laser Marking and UV Printing

After finishing, blades can be marked by laser or UV printing, depending on the model and order requirements. If the blade needs a logo, size label, or application marking, confirm the artwork, placement, and marking method on the selected model before production.

8. Packaging

The factory photo shows individually wrapped blades grouped in trays. For a bulk order, confirm whether the blades should be packed individually or as a set, how many pieces should go in each pack, and whether the package needs a label.

How Oscillating Saw Blades Are Made: From Stamping to Packaging 1

What to Confirm Before Ordering Oscillating Saw Blades in Bulk

Start with the material your customer needs to cut and the tool interface the blade needs to fit. Then confirm the blade dimensions, order quantity, and any finish, marking, or packaging requirements. For repeat orders, use the approved sample or exact model number to identify the blade you want to reorder.

Explore our Oscillating Saw Blade range to compare available models, or contact Johnson Tools with your application and order requirements.

prev
Johnson Tools Exclusive September Super Sale: 5% Off Sitewide for New Customers
recommended for you
Get in touch with us
Produces and exports diamond tools for the stone processing and construction industries to countries around the world.
Contact Us
Telephone: +86-18936085316
Whatsapp:+86-18936085316
QQ:  1017811927
Factory Address
Tuqiao Industrial Park, Jiangning District, Nanjing, Jiangsu, China
Sales dept. Address
No.11009, Building 8, K-Land Manhattan Square, No.5 Weihua Road, SIP, Suzhou, Jiangsu, China 21500 
Copyright © 2026 Johnson Tools Manufactory Co.,Ltd  | Sitemap
Customer service